Add support for buzzer

firmware/at.c

@@ -23,8 +23,9 @@ int8_t cmd_at_tim_handler(uint8_t mode, char* arg);
 int8_t cmd_at_dat_handler(uint8_t mode, char* arg);
 int8_t cmd_at_bts_handler(uint8_t mode, char* arg);
 int8_t cmd_at_ngt_handler(uint8_t mode, char* arg);
+int8_t cmd_at_buz_handler(uint8_t mode, char* arg);
 
-#define AT_NUM 7
+#define AT_NUM 8
 const struct AT_CMD at_commands[AT_NUM] PROGMEM = {
   { "AT",     cmd_at_handler     },
   { "ATI",    cmd_ati_handler    },
@@ -32,7 +33,8 @@ const struct AT_CMD at_commands[AT_NUM] PROGMEM = {
   { "AT+TIM", cmd_at_tim_handler },
   { "AT+DAT", cmd_at_dat_handler },
   { "AT+BTS", cmd_at_bts_handler },
-  { "AT+NGT", cmd_at_ngt_handler  }
+  { "AT+NGT", cmd_at_ngt_handler },
+  { "AT+BUZ", cmd_at_buz_handler }
 };
 
 static struct RTC_DATA* rtc_data;
@@ -319,3 +321,33 @@ int8_t cmd_at_ngt_handler(uint8_t mode, char* arg)
 
   return 0;
 }
+
+int8_t cmd_at_buz_handler(uint8_t mode, char* arg)
+{       
+  uint8_t buz_en;
+
+  switch(mode)
+  {
+    case M_GET:
+      uart_puti(ram_cfg.buz_en, 10);
+      uart_puts("\n\r");
+      break;
+
+    case M_SET:
+      if(!strlen(arg)) return -1;
+      
+      buz_en = atoi(arg);
+      if(buz_en != 0 && buz_en != 1) return -1;
+      ram_cfg.buz_en = buz_en;
+      dump_ram2eem();
+      uart_puts_P(PSTR("+BUZ="));
+      uart_puti(buz_en, 10);
+      uart_puts("\n\r");
+      break;
+
+    case M_NORM:
+      uart_puts_P(PSTR("AT+BUZ=(0|1)\n\r"));
+  }
+
+  return 0;
+}

firmware/buzzer.c

@@ -0,0 +1,23 @@
+#include <avr/io.h>
+#include "common.h"
+#include "buzzer.h"
+#include "ptimer.h"
+#include "config.h"
+
+
+void buz_init(void)
+{
+  R_DDR(BUZZER_PORT) |= 1<<BUZZER;
+  R_PORT(BUZZER_PORT) &= ~(1<<BUZZER);
+}
+
+void buz_on(void)
+{
+  if(ram_cfg.buz_en) tim_buz = BUZZER_DURATION;
+}
+
+void buz_handle_event(void)
+{
+  if(tim_buz) R_PORT(BUZZER_PORT) |= 1<<BUZZER;
+  else R_PORT(BUZZER_PORT) &= ~(1<<BUZZER);
+}

firmware/buzzer.h

@@ -0,0 +1,14 @@
+#ifndef __BUZZER_H__
+#define __BUZZER_H__
+
+#define BUZZER_PORT C
+#define BUZZER 7
+
+#define BUZZER_DURATION 10
+
+void buz_init(void);
+void buz_on(void);
+void buz_handle_event(void);
+
+
+#endif

firmware/config.c

@@ -3,6 +3,7 @@
 struct CFG ram_cfg;
 struct CFG eem_cfg EEMEM;
 const struct CFG pgm_cfg PROGMEM = {
+  BUZ_EN,
   LED_BRIGHTNESS,
   NIGHT_MODE
 };

firmware/config.h

@@ -7,6 +7,7 @@
 
 #define AUTO_BTNES_SIZE 4
 
+#define BUZ_EN 1
 #define LED_BRIGHTNESS 7
 #define NIGHT_MODE { -1, { 0, 0 }, { 0, 0 } }
 
@@ -19,6 +20,7 @@ struct NIGHTM_CFG
 
 struct CFG
 {
+  uint8_t buz_en;
   uint8_t led_btnes;
   struct NIGHTM_CFG night_mode;
 };

firmware/keyboard.c

@@ -2,6 +2,7 @@
 #include "common.h"
 #include "config.h"
 #include "keyboard.h"
+#include "buzzer.h"
 #include "debounce.h"
 #include "rtc.h"
 #include "led.h"
@@ -11,16 +12,19 @@ uint8_t k_inc_hour, k_inc_minute, k_inc_second, k_inc_brightness;
 void inc_hour(void)
 {  
   rtc_inc_time(HOUR);
+  buz_on();
 }
 
 void inc_minute(void)
 {  
   rtc_inc_time(MINUTE);
+  buz_on();
 }
 
 void inc_second(void)
 {  
   rtc_inc_time(SECOND);
+  buz_on();
 }
 
 void inc_brightness(void)
@@ -28,6 +32,7 @@ void inc_brightness(void)
   if(++ram_cfg.led_btnes > 7) ram_cfg.led_btnes = 0;
   led_set_btnes(ram_cfg.led_btnes);
   dump_ram2eem();
+  buz_on();
 }
 
 void kbd_init(void)

firmware/main.c

@@ -4,6 +4,7 @@
 #include "ptimer.h"
 #include "config.h"
 #include "nightm.h"
+#include "buzzer.h"
 #include "time.h"
 #include "uart.h"
 #include "i2c.h"
@@ -24,6 +25,7 @@ int main()
   rtc_int0_init();
   led_init();
   uart_init();
+  buz_init();
   
   uart_bind_handler(at_handler);
   rtc_bind_handler(update_time);
@@ -39,6 +41,7 @@ int main()
     kbd_handle_event();
     uart_handle_event(uart_buf);
     rtc_handle_event();    
+    buz_handle_event();
   }
 }
 

firmware/ptimer.c

@@ -3,10 +3,12 @@
 #include "ptimer.h"
 
 volatile uint16_t tim_debounce;
+volatile uint8_t tim_buz;
 
 void ptimer_init(void)
 {
   tim_debounce = 0;
+  tim_buz = 0;
 
   TCCR2 |= (1<<WGM21);
   TCCR2 |= (1<<CS22) | (1<<CS21) | (1<<CS20);
@@ -18,4 +20,5 @@ void ptimer_init(void)
 ISR(TIMER2_COMP_vect)
 {
   if(tim_debounce) --tim_debounce;  
+  if(tim_buz) --tim_buz;
 }

firmware/ptimer.h

@@ -2,6 +2,7 @@
 #define __PTIMER_H__
 
 extern volatile uint16_t tim_debounce;
+extern volatile uint8_t tim_buz;
 
 void ptimer_init(void);
 

kicad/Binary Clock-cache.lib

@@ -56,18 +56,17 @@ X Pin_4 4 -200 -200 150 R 50 50 1 1 P
 ENDDRAW
 ENDDEF
 #
-# Connector_Generic_Conn_01x10
+# Connector_Generic_Conn_01x09
 #
-DEF Connector_Generic_Conn_01x10 J 0 40 Y N 1 F N
+DEF Connector_Generic_Conn_01x09 J 0 40 Y N 1 F N
 F0 "J" 0 500 50 H V C CNN
-F1 "Connector_Generic_Conn_01x10" 0 -600 50 H V C CNN
+F1 "Connector_Generic_Conn_01x09" 0 -500 50 H V C CNN
 F2 "" 0 0 50 H I C CNN
 F3 "" 0 0 50 H I C CNN
 $FPLIST
  Connector*:*_1x??_*
 $ENDFPLIST
 DRAW
-S -50 -495 0 -505 1 1 6 N
 S -50 -395 0 -405 1 1 6 N
 S -50 -295 0 -305 1 1 6 N
 S -50 -195 0 -205 1 1 6 N
@@ -77,9 +76,8 @@ S -50 105 0 95 1 1 6 N
 S -50 205 0 195 1 1 6 N
 S -50 305 0 295 1 1 6 N
 S -50 405 0 395 1 1 6 N
-S -50 450 50 -550 1 1 10 f
+S -50 450 50 -450 1 1 10 f
 X Pin_1 1 -200 400 150 R 50 50 1 1 P
-X Pin_10 10 -200 -500 150 R 50 50 1 1 P
 X Pin_2 2 -200 300 150 R 50 50 1 1 P
 X Pin_3 3 -200 200 150 R 50 50 1 1 P
 X Pin_4 4 -200 100 150 R 50 50 1 1 P
@@ -116,6 +114,26 @@ X - 2 0 -200 100 U 50 50 1 1 P
 ENDDRAW
 ENDDEF
 #
+# Device_Buzzer
+#
+DEF Device_Buzzer BZ 0 1 Y N 1 F N
+F0 "BZ" 150 50 50 H V L CNN
+F1 "Device_Buzzer" 150 -50 50 H V L CNN
+F2 "" -25 100 50 V I C CNN
+F3 "" -25 100 50 V I C CNN
+$FPLIST
+ *Buzzer*
+$ENDFPLIST
+DRAW
+A 0 0 125 -899 899 0 1 0 N 0 -125 0 125
+P 2 0 1 0 -65 75 -45 75 N
+P 2 0 1 0 -55 85 -55 65 N
+P 2 0 1 0 0 125 0 -125 N
+X - 1 -100 100 100 R 50 50 1 1 P
+X + 2 -100 -100 100 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
 # Device_C
 #
 DEF Device_C C 0 10 N Y 1 F N
@@ -220,6 +238,25 @@ X A 2 150 0 100 L 50 50 1 1 P
 ENDDRAW
 ENDDEF
 #
+# Device_Q_NPN_BCE
+#
+DEF Device_Q_NPN_BCE Q 0 0 Y N 1 F N
+F0 "Q" 200 50 50 H V L CNN
+F1 "Device_Q_NPN_BCE" 200 -50 50 H V L CNN
+F2 "" 200 100 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+DRAW
+C 50 0 111 0 1 10 N
+P 2 0 1 0 25 25 100 100 N
+P 3 0 1 0 25 -25 100 -100 100 -100 N
+P 3 0 1 20 25 75 25 -75 25 -75 N
+P 5 0 1 0 50 -70 70 -50 90 -90 50 -70 50 -70 F
+X B 1 -200 0 225 R 50 50 1 1 I
+X C 2 100 200 100 D 50 50 1 1 P
+X E 3 100 -200 100 U 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
 # Device_Q_PNP_BCE
 #
 DEF Device_Q_PNP_BCE Q 0 0 Y N 1 F N

kicad/Binary Clock.pro

@@ -12,16 +12,6 @@ NetIExt=net
 version=1
 LibDir=
 [eeschema/libraries]
-[schematic_editor]
-version=1
-PageLayoutDescrFile=
-PlotDirectoryName=../../../Pulpit/
-SubpartIdSeparator=0
-SubpartFirstId=65
-NetFmtName=Pcbnew
-SpiceAjustPassiveValues=0
-LabSize=39
-ERC_TestSimilarLabels=1
 [pcbnew]
 version=1
 PageLayoutDescrFile=
@@ -257,3 +247,13 @@ uViaDrill=0.1
 dPairWidth=0.2
 dPairGap=0.25
 dPairViaGap=0.25
+[schematic_editor]
+version=1
+PageLayoutDescrFile=
+PlotDirectoryName=../../../Pulpit/
+SubpartIdSeparator=0
+SubpartFirstId=65
+NetFmtName=Pcbnew
+SpiceAjustPassiveValues=0
+LabSize=39
+ERC_TestSimilarLabels=1